-
Single Family Residential Calculations – 2020
- Single-2020 – $100.00
This 4-hour continuing educational course will take a look at the requirements for calculating branch-circuit, feeder, and service loads based on the table and information provided within the National Electrical Code. Part I provides general requirements for calculation methods while Part II provides calculation methods for branch-circuit loads. Pa
-
Solar Photovoltaic Systems – 2020
- Solar-2020 – $100.00
This 4-hour continuing educational course will look at solar PV systems including the array circuit(s), inverter(s), and controller(s) for such systems. The systems covered by this article may be interactive with other electrical power production sources or stand-alone or both and may or may not be connected to energy storage systems such as batter
-
2023 NEC Update Course – In-Person
- CEU – $400.00
This is a mandatory in-person seminar.
-
Article 680 – Swimming Pools, Fountains, and Similar Locations – Webinar 2024
- Pools – March 16th – $100.00
The 4-hour seminar will look at the construction and installation of electrical wiring for, and equipment in or adjacent to, all swimming, wading, therapeutic, and decorative pools; fountains; hot tubs; spas; and hydromassage bathtubs, whether permanently installed or storable, and to metallic auxiliary equipment, such as pumps, filters, and simila
-
Delaware 10-Hour 2023 NEC Update Course
- Delaware 10-Hour Update Course – $30.00
-
Designing Electrical Systems – Webinar 2024
- DES – February 10th – $100.00
This seminar will look at different aspects of electrical wiring based on the design requirements of the latest edition of the National Electrical Code. This seminar will take you through the calculation processes and conductor sizing requirements for many different electrical component installations that can be found throughout the NEC.
-
Electrical Industry Safety
- Electrical Industry Safety – $50.00
Electrical Industry Safety
-
Electrical Theory & Calculations
- Calculations – $50.00
Electrical Theory & Calculations
-
Grounding & Bonding – Webinar 2024
- GB – $100.00
This 4-hour seminar will cover the general requirements for grounding and bonding of electrical installations, and the specific requirements for systems, circuits, and equipment that are required, permitted, or not permitted to be grounded. It will look at circuit conductors to be grounded on grounded systems along with the location of the groundin
-
Hazardous Locations – Webinar 2024
- HL – $100.00
This 4-hour continuing educational course is part of the 34-hour package and will meet your New Jersey electrical contractors license renewal requirements. Articles 500 through 504 cover the requirements for electrical and electronic equipment and wiring for all voltages in Class I, Divisions 1 and 2; Class II, Divisions 1 and 2; and Class III, Div